Table relationship and enforce referential

Guide to table relationships - Access

table relationship and enforce referential

Solution: It sounds like there is some data in one of the tables that is stopping the relationship being recreated that has been added and does. When you create a relationship between two tables, it is usually a good idea to enforce. So what does this technical-sounding phrase mean?. Your relationship diagram shows that you've made the ID fields your primary key in all your tables, but you're not using them for your joins. Thus, they serve.

You can't delete a record from a primary table if matching records exist in a related table unless you select the. In this lesson you will learn how to enforce referential integrity. You should still have the open from the previous lesson in order to complete this lesson. First, let's establish a relationship between the tblCustomers table and the tblCustomerTours table The Edit Relationships dialog box appears, as shown in figure.

We want to enforce referential integrity so that you can't enter a CustomerID in the tblCustomerTours table unless that CustomerID number already exists in the tblCustomers table.

Microsoft can't create this relationship and enforce referential integrity error

Check the Enforce Referential Integrity box. This will enforce referential integrity between the tables. If you get an error message, it's because your tables and fields don't meet all the required conditions listed on the previous page. There are two other very important boxes in the Edit Relationships dialog box: Cascade Update Related Fields: When you change data in the main field of one table, Access will automatically update the matching data in the related table.

Cascade Delete Related Records: When you delete a record in the main table, Access will automatically delete any matching records in the related table. These are both very powerful optionsthink twice before using them. Now you can save the changes to the relationship. Click Create to create the relationship between the tblCustomers and tblCustomerTours tables.

Access creates the relationship between the two tables and enforces between them. Notice that the join line between the tblCustomers table and the tblCustomerTours table looks a little different. In this way the values in the "many" table reference the corresponding values in the "one" table. Suppose you have a one-to-many relationship between Shippers and Orders and you want to delete a Shipper.

If the shipper you want to delete has orders in the Orders table, those orders will become "orphans" when you delete the Shipper record.

The orders will still contain a shipper ID, but the ID will no longer be valid, because the record that it references no longer exists. The purpose of referential integrity is to prevent orphans and keep references in sync so that this hypothetical situation never occurs.

You enforce referential integrity by enabling it for a table relationship see Enforce referential integrity for step-by-step instructions. Once enforced, Access rejects any operation that violates referential integrity for that table relationship. This means Access will reject both updates that change the target of a reference, and deletions that remove the target of a reference. For such cases, what you really need is for Access to automatically update all the effected rows as part of a single operation.

That way, Access ensures that the update is completed in full so that your database is not left in an inconsistent state, with some rows updated and some not. When you enforce referential integrity and choose the Cascade Update Related Fields option, and you then update a primary key, Access automatically updates all fields that reference the primary key. When you enforce referential integrity and choose the Cascade Delete Related Records option, and you then delete a record on the primary key side of the relationship, Access automatically deletes all records that reference the primary key.

The Relationships window opens and displays any existing relationships. If no table relationships have been defined and you are opening the Relationships window for the first time, Access prompts you to add a table or query to the window. Open the Relationships window Click File, and then click Open. Select and open the database.

On the Database Tools tab, in the Relationships group, click Relationships. If the database contains relationships, the Relationships window appears.

table relationship and enforce referential

If the database does not contain any relationships and you are opening the Relationships window for the first time, the Show Table dialog box appears. Click Close to close the dialog box. On the Design tab, in the Relationships group, click All Relationships.

Microsoft can't create this relationship and enforce referential - Microsoft Community

This displays all of the defined relationships in your database. Note that hidden tables tables for which the Hidden check box in the table's Properties dialog box is selected and their relationships will not be shown unless the Show Hidden Objects check box is selected in the Navigation Options dialog box.

A table relationship is represented by a relationship line drawn between tables in the Relationships window. A relationship that does not enforce referential integrity appears as a thin line between the common fields supporting the relationship.

Enforcing Referential Integrity : MS Access

When you select the relationship by clicking its line, the line thickens to indicate it is selected. If you enforce referential integrity for this relationship, the line appears thicker at each end. When the Relationships window is active, you can select from the following commands on the ribbon: On the Design tab, in the Tools group: When you select a relationship line, you can click Edit Relationships to change the table relationship.

table relationship and enforce referential

You can also double-click the relationship line. The report shows only the tables and relationships that are not hidden in the Relationships window. On the Design tab, in the Relationships group: Note that hidden tables tables for which the Hidden check box in the table's Properties dialog box is selected and their relationships will not be shown unless Show Hidden Objects is selected in the Navigation Options dialog box.

If you made any changes to the layout of the Relationships window, you are asked whether to save those changes. Top of Page Create a table relationship You can create a table relationship by using the Relationships window, or by dragging a field onto a datasheet from the Field List pane.

When you create a relationship between tables, the common fields are not required to have the same names, although it is often the case that they do. Rather, those fields must have the same data type. If the primary key field is an AutoNumber field, however, the foreign key field can be a Number field if the FieldSize property of both fields is the same.

When both common fields are Number fields, they must have the same FieldSize property setting. Create a table relationship by using the Relationships window Click File, and then click Open.

If you have not yet defined any relationships, the Show Table dialog box automatically appears. If it does not appear, on the Design tab, in the Relationships group, click Show Table. The Show Table dialog box displays all of the tables and queries in the database. To see only tables, click Tables. To see only queries, click Queries.

To see both tables and queries, click Both. Select one or more tables or queries and then click Add.

table relationship and enforce referential

When you have finished adding tables and queries to the Relationships window, click Close. Drag a field typically the primary key from one table to the common field the foreign key in the other table. To drag multiple fields, press the CTRL key, click each field, and then drag them. The Edit Relationships dialog box appears. Verify that the field names shown are the common fields for the relationship. If a field name is incorrect, click the field name and select a new field from the list.

To enforce referential integrity for this relationship, select the Enforce Referential Integrity check box. For more information about referential integrity, see the Understanding Referential Integrity and the Enforce Referential Integrity sections. The relationship line is drawn between the two tables. If you selected the Enforce Referential Integrity check box, the line appears thicker at each end. This means the Indexed property for these fields should be set to Yes No Duplicates.

If both fields have a unique index, Access creates a one-to-one relationship. This means the Indexed property for this field should be set to Yes No Duplicates.

The field on the "many" side should not have a unique index. When one field has a unique index and the other does not, Access creates a one-to-many relationship. Create a table relationship by using the Field List pane You can add a field to an existing table that is open in Datasheet view by dragging it from the Field List pane.

The Field List pane shows fields available in related tables and also fields available in other tables. When you drag a field from an "other" unrelated table and then complete the Lookup Wizard, a new one-to-many relationship is automatically created between the table in the Field List pane and the table to which you dragged the field.

This relationship, created by Access, does not enforce referential integrity by default. To enforce referential integrity, you must edit the relationship. See the section Change a table relationship for more information.

Open a table in Datasheet view On the File tab, click Open. In the Open dialog box, select and open the database. In the Navigation Pane, right-click the table to which you want to add the field and create the relationship, and then click Open. The Field List pane appears. The Field List pane shows all of the other tables in your database, grouped into categories.

When you work with a table in Datasheet view, Access displays fields in either of two categories in the Field List pane: Fields available in related tables and Fields available in other tables. The first category lists all of the tables that have a relationship with the table you are currently working with.

The second category lists all of the tables with which your table does not have a relationship. To add a field to your table, drag the field that you want from the Field List pane to the table in Datasheet view.

Enforcing Referential Integrity

Drag the field that you want from the Field List pane to the table that is open in Datasheet view. When the insertion line appears, drop the field in position. The Lookup Wizard starts. Follow the instructions to complete the Lookup Wizard. The field appears in the table in Datasheet view. When you drag a field from an "other" unrelated table and then complete the Lookup Wizard, a new one-to-many relationship is automatically created between the table in the Field List and the table to which you dragged the field.